PERCo IR-03.1, Руководство по сборке и эксплуатации

Страница: 8 / 14

IR-03.1 Proximity Reader
6.3 Installation tools

1.2÷1.5 kW hammer drill;

Ø16 mm hard-alloyed drill bits;

Ø5 mm hard-alloyed drill bits;

Flat slot screwdriver No2;

Mounting knife;

Level;

Measuring tape (2 m).
Figure 3.
IR-03.1
reader installation layout
(reader housing is dotted)
Figure 4. Piezoelectric element (
B1
),
jumpers «reader number» (
XP2
), jumper
«switch off end-of-line resistor» (
XP1
)
6.4 Installation procedure
Assembly order:
1. Select the reader mounting place. Factors to be considered are given in clause 6.1.
2. Make the marking and holes in mounting surface for fixing the base-plate and cable
laying from the reader (Ref. Fig. 3).
3. Release the screw at reader bottom fixing it to metal base-plate. Take off the metal
base-plate and fasten it with 4 screws from delivery set.
7