PERCo IR-03.1, Руководство по сборке и эксплуатации

Страница: 5 / 14

Certificate, Assembly and Operation Manual
Cable length .................................................................................................................. 0.8 m
Distance between the reader and external controller
for cable type F/UTP2-Cat5e 2×2×0,52 ........................................................ max. 50 m
maximal ............................................................................................................ 200 m
2
Mean lifetime ........................................................................................................... 8 years
Ingress Protection Rating .......................................................................... IP67 (EN 60529)
Electric shock protection class ...................................................................... III (IEC 61140)
Reader dimensions (without cable)...............................................................145×50×20 mm
Reader weight...................................................................................................... max. 230 g
3 DELIVERY SET
Reader IR-03 ......................................................................................................................1
Metal base-plate .................................................................................................................1
Assembly set:
Plastic dowels .............................................................................................................4
Screws .......................................................................................................................4
Package ..............................................................................................................................1
Assembly and operation manual .........................................................................................1
4 PRODUCT DESCRIPTION
4.1 Design
Reader consists of a unit in plastic housing with three-color LED indicator on the front
panel: green (upper), yellow (central) and red (lower). Reader comes with a sound
indication.
The card code reading is confirmed by the short-time sound signal and alteration of the
yellow (central) light indicator’s state (switches off if the light was on and switches on if the
light was off).
Reader protection from environmental exposures is ensured by covering its board with
compound. Shield cable for reader connection is output on its rear side.
Also the reader back side features two jumpers:

closer to reader centre – three jumpers “reader number” (see Table 1);

closer to reader lower edge – jumper "switch off end-of-line resistor" (jumper uncut
– end-of-line resistor is present, after cutting the jumper – end-of-line resistor is
switched off).
Note:
Up to 8 readers can be connected to one controller. In this case, each reader using
the jumper "reader number" must set an individual number (see Table 1). All readers
with even numbers will be tied to one direction of the pass, and all readers with odd
numbers to the other. Reference of the reader number to a passage direction is
programmed by the software.
2
Maximum distance between the reader and external controller depends on the cable cross-section.
For selecting the cable type please contact PERCo specialists.
4