PERCo FP-11Q.1, Руководство по установке

Страница: 4 / 10

FP-11Q.1 Front panel with barcode scanner for ST-11 Speed gate
3
Remove the panel and drill holes in the mounting surface for anchors to secure the panel. Insert
anchors into holes.
6. Connect scanner and ACS controller.
7. Using a cable (3), connect the front indication module (2) to the indication plate in the ST-11
section. The procedure for connecting cables to the indication plate is shown in Fig. 2:
−
so that the white arrow on the front indication module lights up - the cable from the end block
must be connected to the ARROW connector on the indication plate;
−
so that the red cross is lit on the front indication module
– the cable from the end block must
be connected to the CROSS connector on the indication plate.
8. Final install FP-11Q.1 front panel back on ST-11 speed gate and fix it with anchor bolts on the
mounting surface. Close the front panel cover.
9. Reinstall the ST-11 top cover, don't forget to connect the indicator cable of the artificial stone
cover to the LIGHT connector of the indication plate (see Fig. 2).
Figure 2. FP-11Q.1 front panel
1
–
MERTECH N160 P2D barcode scanner; 2
– front indication module;
3
– front indication module cable; 4 – front panel cover; 5 – front panel cover lock;
6
– bracket to fix an ACS controller; 7 – screws to fix the bracket
5 PERCO WARRANTY
PERCo (the Manufacturer) warrants that the FP-11Q.1 Front panel (the Product) complies with
applicable statutory safety requirements, electromagnetic compatibility provided that the instructions
on storage, installation and operation, given in the Assembly & Operation Manual, are observed.
The warranty period is 5 (five) years commencing from the date of sale.
Should there be no date of sale on the warranty card, the warranty period shall commence from the
date of manufacture specified in the Certificate and on the Product label.