PERCo FP-11Q.1, Руководство по установке

Страница: 2 / 10

FP-11Q.1 Front panel with barcode scanner for ST-11 Speed gate
1
1 APPLICATION
FP-11Q.1 front panel with barcode scanner is designed for ST-11 speed gate installation. There
is also an opportunity to install ACS controller plate inside. MERTECH N160 P2D is built into the
panel as a barcode scanner.
Attention!
Product is supplied as a part of ST-11 but to be ordered separately.
ACS controller is not included in a delivery set and have to be purchased separately by the
customer.
Climatic operation conditions of the product are determined by the operating conditions of ST-11
(category NF4 according to GOST15150-69
– operation in premises with climate control, at an
ambient temperature of +1°C to +50°C and relative air humidity up to 80% at +25°C), as well as the
operating conditions of the built-in ACS controller.
The storage is allowed indoors at ambient temperature from -40
°C to +50°C and at relative air
humidity up to 80% at +1
5°C. In the storage room should also be no acid fumes and gases, causing
the corrosion.
Product in the original package should be transported in closed type cargo transport units (in railroad
cars, containers, closed cars, under decks, by plane, etc.). During transportation and storage, crates
can be stacked no more than 6 layers high.
Overall dimensions of the transportation crate ....................................................... 108
×23×18
cm
Gross weight .................................................................................................. not more than 20 kg
2 DELIVERY SET
FP-11Q.1 front panel with barcode scanner ....................................................................... 1
Self-adhesive PCB pillars for indication plate and ACS controller ............................................. 4
Key to the lock of the front cover of the panel ......................................................................... 1
Certificate and installation manual .......................................................................................... 1
USB cable to barcode scanner ............................................................................................... 1
Warranty card and quick guide for
MERTECH N160 P2D scanner .......................................... 1
Additionally, by separate order, the following is supplied:
Anchor M10 with DIN7984 bolt (hexagon socket) and washer, galvanized .............................. 2
3 TECHNICAL SPECIFICATIONS
Overall dimensions of the panel
(L×W ×H), ...................................................... 152×110×1002
mm
Net weight ........................................................................................................ not more than 8 kg
MERTECH N160 P2D built-in scanner:
Scanning module type ................................................................................................ 2D-image
Supported barcode types:
2D: PDF417; MicroPDF417; Data Matrix; Maxicode; QR Code; MicroQR; Aztec; Hanxin;
1D: UPC; EAN; Code128; Code 39; Code 93; Code11; Matrix 2 of 5; Interleaved 2 of 5;
Codabar;MSI Plessey; GS1 DataBar; China Postal; Korean Postal
Barcode scanning speed ............................................................................... up to 100 scan/sec
Barcode scanning range ....................................................................................... up to 100 mm
Scanner resolution ................................................................................................... 640
×480 Px
Minimum contrast of a readable barcode ............................................................................. 20%
Scan angle .................................................................................................................... 72
°×64°
Barcode sensitivity ......................................................
± 65° Incline / 360° Turn / ± 60° Deviation
Backlight ....................................................................................................... LED 6500K (white)
Communication interface .................................................................................................... USB