Peqlab EV200 Series, Инструкция по эксплуатации

Страница: 17 / 24

DATA LOGGING
1. Select SET-UP and press SET.
---- STAND-BY ----
SET-UP
2. Select DATA and press SET.
3. Select DURATION and press SET.
4. Select the desired time for the data-logging and press SET.
5. Select LOG and press SET.
---- SET-UP ----
DATA
6. Decide whether or not all data (voltage, current, power,
time) during the next experiments should be logged and
press SET.
7. Select SET-UP and press SET to return.
----- DATA -----
DURATION
•
Starting a new experiment will erase the previous data in memory.
•
Stored data can be transferred to a computer via the RS232 output using
a software (www.consort.be).
LOG DATA
FOR:
10h
•
At any time, you can return in the stand-by mode by holding the SET but-
ton for 2 seconds.
----- DATA -----
LOG
LOG
DATA: YES
----- DATA -----
SET-UP
PEQLAB Biotechnologie GmbH_V1107
15