2
018-
11
8
Product Description
Cable Gland Connection Layout
The cable glands have different inlays in different sizes. Therefore, it is important to use the
correct installation cables with the corresponding cable gland. Do not use the cable glands for
any other cable than stated below. Do not interchange the cables.
Figure 2.1
Cable gland connection layout
Danger!
Accumulation of condensed water within the housing can cause a short and result in an
ignition.
A blocked breather vent cannot provide ventilation or drainage.
Do not block or restrict the breather vent! Do not insert any sharp objects into the breather vent!
Cable gland used for:
Allowed Cable
Diameter
Tightening Torque
1
Power supply
6-10 mm
5 Nm
2
Ethernet
6-10 mm
3
USB Ex e
3-7 mm
4
USB Ex i
3-7 mm
5
USB Ex i
3-7 mm
6
User modules
available as options,
e.g., TTY Ex i, RS-232
Interface, RS-485
Interface.
If option not available,
cable gland is
replaced by a blind
plug.
3-7 mm
1
2
3
4
5
6
