VBA-2A-KE5-IL/UL, VBA-4A-KE5-IJL/UJL
Installation
2
0
1
8
-0
7
13
4
Installation
4.1
Storage and Transport
For storage and transport purposes, package the unit using shockproof packaging material
and protect it against moisture. The best method of protection is to package the unit using the
original packaging. Furthermore, ensure that the ambient conditions are within allowable range.
4.2
Unpacking
Check the product for damage while unpacking. In the event of damage to the product, inform
the post office or parcel service and notify the supplier.
Retain the original packaging in case the device must be stored or shipped again at a later
date.
Should you have any questions, please contact Fuchs.
4.3
Mounting
Mount the module by snapping it onto a 35 mm DIN rail.
Figure 4.1
Unlocking terminals
4.4
AS-Interface and AUX Auxiliary Voltage Connection
VBA-2A-KE5-IL/UL and VBA-4A-KE5-IJL/UJL
The analog module has a pair of terminals for looping through each of the ASI+, ASI-, AUX+,
and AUX leads. Each pair of terminals is bridged in the terminal block. This ensures the
connection is retained even if the terminal block is disconnected from the module.
1.
Lift the label carrier upwards.
2.
Guide a suitable screwdriver through the eye on the ejector and then:
■
Insert the blade of the screwdriver on the bottom of the foot bolt.
■
Then pull on the handle of the screwdriver in the direction indicated.
3.
Remove the terminal block.
1.
2.
3.
Warning!
Note the permitted operating temperature
The permitted operating temperature of the cables connected to the terminal block must be at
least +80
°
C!
