manualshive.com logo in svg

Pepperl+Fuchs VB14A, Руководство пользователя, Страница: 22 / 54

Поделиться
Скачать
Pepperl+Fuchs VB14A Скачать руководство пользователя страница 22

Barcode Scanner VB14A
INSTALLATION

Subject to reasonable modifications due to technical advances.

Copyright Fuchs, Printed in Germany

Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com

Da

te of

 issue

12/

2

005

22

Code Verifier

If the VB14A is used as a Code Verifier, it is possible to indicate to the scanner what 
code to store as the verifier code by means of an external hardware input.

The Code Verifier parameter must be enabled and the configuration parameters to 
allow correct Code Type reading must be saved to the scanner in order to read the 
verifier code.

To activate the input, connect together pins 23 and 24 (CTSAUX and RTSAUX) of the 
25-pin connector (for example with a push-button), before the active edge of the 
External Trigger input (or before the code passes under the laser beam for the 
Automatic operating mode.

The next read code will be stored as the verifier code in the scanner's RAM and NON-
VOLATILE (EEPROM) memory by default.

Then the two pins must be disconnected.

Since it uses part of the RS232 auxiliary serial interface, this interface is limited when 
using this option and the Handshake selection must not be set to RTS/CTS.

6.2.4

Inputs

The inputs available on the connector supplied with the scanner are the pins relative 
to the External Trigger, as indicated below:

The External Trigger input is used in the On-Line operating Mode and tells the 
scanner to scan for a code. The active state of this input is selected in software. Refer 
to the VisoSetup Help On Line. 

The yellow LED (figure 3.1 (2)) is on when the External Trigger forces a current flow 
through the EXT TRIG+ and EXT TRIG- pins.

This input is optocoupled and can be driven by both an NPN or PNP type command. 
The connections are indicated in the following diagrams:

Figure 6.12

Input NPN command using external power

Connector

Name

Function

25-Pin

18

EXT TRIG+

external t

19

EXT TRIG-

external trigger -

30 V DC max.

EXTERNAL 
TRIGGER

Signal

18

19

+5 V

Vext

V

EXT TRIG+

EXT TRIG-

VB14A 25-pin

Содержание VB14A























































Отзывы:

Нет отзывов