43
Radar motion sensors RMS-D, RMS-D-RC, RMS-D BROAD, RMS-D-NA, RMS-D-RC-NA
Operation
7.1.1
Size of the Sensing Area
A wider sensing area can be achieved with an alternative plug-in antenna available as an accessory.
To install, carefully remove the antenna from the retainer with two fingers and insert the new antenna into the
appropriate opening. Press lightly on the antenna. (see Figure7.2:)
Figure 7.2:
Wide sensing area narrow sensing area
7.1.2
Sensitivity of the Sensing Area
You can adjust the size of the sensing area with the sensitivity potentiometer (2).
The further you turn the potentiometer clockwise, the larger the sensing area
Figure 7.3:
Adjustment of the sensitivity of the sensing range
7.2
Setting with DIP switches and Potentiometer
Detection mode, Turtle mode, cross-traffic masking and the relay output mode can be adjusted with the DIP
switches. Sensitivity can be adjusted with the potentiometer. (for RMS-D-RC, DIP switch 6 must also be UP (ON))
Caution!
Do not use any metal tools to handle the antenna.
The antenna is an electrostatically sensitive component.
ca. 4.0 m
ca. 2.0 m
ca. 3 m
ca. 2.5 m
min.
max.
min.
max.
50 %
