Pepperl+Fuchs PXV***-F200-SSI-V19 Series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 34

background image

2

01

7-

11

18

PXV...-F200-SSI-V19

Commissioning

4.2

Parameterization

The reader can be adapted to optimally meet specific requirements through parameterization.

The reader can be parameterized via the service interface (internal parameterization) or via an

optical parameterization code (external parameterization).

4.2.1

Internal Parameterization Using Parameterization Software

Internal parameterization of the reader via the USB interface must be started within 10 minutes

of the reader being switched on. A time lock disables the reader once this time has elapsed.

The time lock remains inactive during the parameterization process. The time lock disables the

reader only if no parameterization activities take place for more than 10 minutes.
The

Vision Configurator

software is available for comprehensive, optimal configuration of the

reader. This configuration software is available as a free download from www.pepperl-

fuchs.com. Follow the instructions that appear on your screen during the installation.

Connecting the Service Interface

1. 1. First connect the round plug connector to the reader.
2. 2. Connect the plug-in power supply to the parameterization cable.
3. 3. Connect the plug-in power supply to a socket.

The ring light of the reader and the LED2 "PWR/ADJ/ERR/NO CODE" lights up

continuously or flashes.

4. 4. Now connect the USB plug-in connector to your PC.

Configuring the Reader

1. Start the "Vision Configurator" software.

2. Configure the reader using the "Vision Configurator" software.
3. Transfer the parameter list to the reader.
4. Save the parameterization.
5. Switch off the power supply on the reader.
6. Remove the USB plug for the parameterization cable from your PC.
7. Remove the parameterization cable from the reader and connect the round plug connector

for the service interface to the stopping plug.

The reader is now configured according to your specifications and can be used in your

application.

Note!

Additional easy-to-follow steps for installing the software are described in the

Vision

Configurator

manual. The Vision Configurator manual can be found online at www.pepperl-

«
...
16
17
18
19
20
...
»

Содержание PXV***-F200-SSI-V19 Series



































Отзывы:

Нет отзывов

Похожие инструкции для PXV***-F200-SSI-V19 Series

Бренд: Samson Страницы: 64

Бренд: Emerson Страницы: 40

Бренд: Emerson Страницы: 53

Бренд: Emerson Страницы: 56

Бренд: Emerson Страницы: 64

Бренд: Aacraft Страницы: 2

Бренд: Samson Страницы: 100

Apos KBH 4/200 HS

Бренд: Vahle Страницы: 20

PositionMaster EDP300

Бренд: ABB Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды