20
21
-1
1
8
Power Supply PS1000-A6-24.20.R
Intended Use
3
Intended Use
This device is designed for installation in an enclosure and is intended for the general
professional use such as in industrial control, office, communication, and instrumentation
equipment.
Do not use this power supply in equipment, where malfunction may cause severe personal
injury or threaten human life.
Function
The device is used to supply field devices with 24 V DC and 20 A.
The device includes a decoupling MOSFET for building 1+1 or n+1 redundant power supply
systems.
To achieve current sharing between power supplies connected in parallel, the device
is permanently factory-set to
parallel use
operating mode.
The device status is indicated by an LED.
The device has a relay contact output for remote monitoring.
The device is mounted on a 35 mm DIN mounting rail according to EN 60715.
Reference Conditions
All parameters are typical values specified at 230Vac, 50Hz input voltage, 24V, 20A output
load, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
