Pepperl+Fuchs PC419, Техническое руководство

Страница: 53 / 80

2015-01
49
Accessories VisuNet RM and VisuNet PC
Mounting the Spacer on the Holder for Barcode Reader
1. Tighten the both countersunk head screws with an allan key on the spacer.
1. Washer
2. Lock-washer
3. Cylinder head screw with allen screw
4. Countersunk head screw
5. Spacer
6. Holder for barcode reader
7. O-ring seal
Mounting the Holder for Barcode Reader with the Spacer on the AG1 Housing
1. Put the lock-washer (2) and the washer (1) on the cylinder head screw with allen screw (3).
2. Put the cylinder head screws (3) through the drillings on the AG1 housing.
3. Place the O-ring seal into the spacer.
4. Tighten the cylinder head screw (3) with an allen key on the AG1 housing.