IDENT-I • IRI-KHD2-4.RX, IRI-KHA6-4.RX
Installation
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
Da
te
of
issue
27.
02 .
2002
9
4
Installation
Code carriers with ferrite core can be mounted embeddable in steel (see data sheets).
The surface with the Fuchs logo must point towards the read head and must
be installed "face-on" or raised. Only this way, a safe operation is ensured.
Flush mounting in metal reduce the read distance.
Versions with mounting links are available.
The read distances and the maximum misalignment from the read axis are depending
on the used code carrier (see data sheets).
Up to 4 read heads can be connected to the control interface. The control interface is
connected to the computer via a serial interface.
The code carriers should not be mounted recessed in metal, as the
read distances could be impaired.
The read heads must not be mounted embeddable in metal.
The maximum transmission rate is depending on the read distance.
