Pepperl+Fuchs IQT-F116-R4M-V1, Руководство пользователя

Страница: 11 / 18

IQT-F116-R4*-V1
Operation
20
13-
10
11
Standard read/write commands
Read data
Write data
Fixcode
5.3 System commands
Command description Abbreviation Page
single read words SR See "single read words SR" on page 14
enhanced buffered read
words
ER See "enhanced buffered read words ER" on
page 14
Command description Abbreviation Page
single write words SW See "single write words SW" on page 14
enhanced buffered write
words
EW See "enhanced buffered write words EW"
on page 15
Command description Abbreviation Page
single read fixcode SF See "single read fixcode SF" on page 15
enhanced buffered read
fixcode
EF See "enhanced buffered read fixcode EF"
on page 15
Note!
Command structure
Since the IQT-F116-R4 M -V1 features a device adress (= <DeviceNo>), you must
specify the device address within the commands.
For the IQT-F116-R4-V1 the device address is not applicable.
Examples
Command structure IQT-F116-R4-V1:
Command: <CommandCode><CommandParameters><CHCK><ETX>
Response: <Status><Data><CHCK><ETX>
Command structure IQT-F116-R4
M -V1:
Command:
<CommandCode>
<DeviceNo> <CommandParameters><CHCK><ETX>
Response: <Status> <DeviceNo> <Data><CHCK><ETX>
Optionally you can replace <CHK><ETX> with #<CR>.