Pepperl+Fuchs IQT-F116-R4M-V1, Руководство пользователя

Страница: 10 / 18

20
13-
10
10
IQT-F116-R4*-V1
Operation
Below you will find an overview of the memory setup and the memory capacities
of the various read/write tags:
5.2 Command overview
The commands in the list are described in detail on the following pages.
System commands
Commands for IQT-F116-R4M-V1 only
Read-Only or
Read/Write Tag Access
Address Range
<WordAddr>
Data Range
<WordNum>
Memory
Capacity in
Bytes
ICODE_SLI Read/write 0000 ... 001D 01 ... 1C 112
ICODE_SLI Read-Only Code - - 8
TAGIT_HFI Read/write 0000 ... 0039
01 ... 20
*
256
TAGIT_HFI Read-Only Code - - 8
SRF_55V02P Read/write 0000 ... 0037
01 ... 20
*
224
SRF_55V02P Read-Only Code - - 8
SRF_55V10P Read/write 0000 ... 00F7
01 ... 20
*
992
SRF_55V10P Read-Only Code - - 8
Table 5.2
*
The data range <WordNum> is limited either by the maximum memory
capacity of the read/write tag, or by the memory bank of the read/write unit.
Command description Abbreviation Page
version VE See "version VE" on page 12
quit QU See "quit QU" on page 13
change tag CT See "change tag CT" on page 12
configure interface CI See "configure interface CI" on page 13
reset RS See "reset RS" on page 13
configuration store CS See "configuration store CS" on page 13
Command description Abbreviation Page
set device address SD See "set device address SD" on page 14
get device address GA See "get device address GA" on page 14