Pepperl+Fuchs EI-0D2-10Y-10B-LT, Руководство пользователя

Страница: 4 / 17

2
022-
03
4
Ethernet Isolator
Safety
1 Safety
1.1 General
Responsibility for planning, assembly, commissioning, operation, maintenance,
and dismounting lies with the plant operator.
Installation and commissioning of all devices may be performed only by trained
and qualified personnel.
Protection of operating personnel and the system is not ensured if the product is
not used in accordance with its intended use.
Observe the applicable laws and regulations regarding the intended use of the
device. The devices are only approved for proper use for the intended purpose.
Improper use will void any warranty and liability claims.
The corresponding datasheets, declarations of conformity, and/or EC-type exam-
ination certificates form an integral part of this document. The data sheet contains
the electronic data of the EC-type-examination certificate.
These documents can be found at www.pepperl-fuchs.com or contact your local
Fuchs representative.
1.2 Symbols Used
Safety-Relevant Symbols
Informative Symbols
Action
Danger!
This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.
Warning!
This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.
Caution!
This symbol indicates a possible fault.
Non-observance could interrupt the device and any connected systems and
plants, or result in their complete failure.
Note
This symbol brings important information to your attention.
Table 1.1 Ethernet Isolator