Pepperl+Fuchs AS-I 3.0 PROFINET, Руководство пользователя

Страница: 41 / 72

AS-i 3.0 PROFINET Gateway in Stainless Steel
Configuration of AS-i/PROFINET Gateways
31
.1.
201
4
41
10. Configuration of AS-i/PROFINET Gateways
This section includes information for the configuration of the AS-i 3.0 PROFINET
Gateway in a PROFINET network.
10.1 Projecting PROFINET network
The configuration tool needs information about the bus participants for the projec-
ting of a PROFINET network. These information is provided from the manufactur-
ers of bus participants as "equipment master data" in GSDML files.
During the configuration, the GSDML file must be imported into the PROFINET
configuration tool.
The AS-i/PROFINET Gateway appears then in the hardware catalog as:
"PROFINET IO/Other field devices/Gateway/Fuchs AS-interface".
10.2 Logical slots
10.2.1 Options
The GSD file offers several combinations (several lengths) for transmitting I/O da-
ta, the command interface , as well as AS-i 16 bit data. This allows them to be
transmitted directly as part of the process data channel.
Up to 30 modules can be configured
Possible options:
Information!
The device name of the AS-i 3.0 PROFINET-Gateway is: "". Any PROFINET partici-
pant will be identified over this name. That means that every PROFINET participant
has to become a precise name with the help of AS-i Control Tools.
The name of the gateways is "" per default.
This must be changed to the requested name during the projecting!
Length description
16 byte I digital input (slave 0 - 31)
20 byte I digital input (slave 0 - 7b)
32 byte I digital input (slave 0 - 31B)
Tab. 10-2.
Information!
Up to four command interfaces can be integrated.