Installation
2
0
1
8
-1
2
21
3. Connect the other end of the grounding cable to adjacent metal components
(e.g., mounting base, frame, etc.).
The device is grounded.
Establishing the network
The M12 D-coded plug on both devices features the standard assignment for
Ethernet. The optical data coupler automatically locates transmitting and
receiving lines (Auto-MDIX), meaning there is no need for a crossover cable.
To connect the device to a network, proceed as follows:
1. Plug the prepared network cable with the 4-pin M12 plug into the socket pro-
vided on the rear of the housing.
2. Screw the lock nut onto the connector as far as it will go.
This ensures that the power cable cannot be pulled out inadvertently.
3. Connect the network cable to the network connection provided for this
purpose.
The device is ready for operation.
4.4
Storage and Transportation
Keep the original packaging. Always store and transport the device in the original
packaging.
Store the device in a clean and dry environment. The permitted ambient
conditions must be considered, see datasheet.
Note!
Unshielded cables (UTP) are not suitable for maintaining noise immunity.
Make sure that the Ethernet cables are at least of CAT5 quality.
