Installation
2
0
1
8
-1
2
17
4
Installation
4.1
Preparation
Unpacking the device
1. Check the packaging and contents for damage.
In the event of damage, inform the shipping company and notify the
supplier.
2. Check the package contents against your order and the shipping documents
for completeness and accuracy.
Should you have any questions, direct them to Fuchs.
3. Retain the original packaging in case the device is to be stored or shipped
again at a later date.
4.2
Mounting
The device has two mounting holes and four retaining feet for easy mounting of
the optical data coupler in your plant. If required, M4 inserts can be pressed into
these four retaining feet. This allows existing adjustment and mounting options to
be used. Further mounting aids for quick adjustment are available in the range of
device accessories. See chapter 3.7.1
Warning!
Danger due to visible class 1M laser light
If the laser light is pointed at people, especially in the dark, this can lead to
irritation and result in the risk of an accident due to glare.
If the laser light is viewed through optical instruments (magnifying glasses,
microscopes, telescopes, or binoculars, etc.), it may damage the observer's eyes
due to a burning lens effect.
Install the device so that the warnings are clearly visible and legible.
Do not point the laser light at people.
Do not look at the laser light using optical instruments.
The maintenance and repair of a class 1M laser must be performed by authorized
service personnel only.
LS684*
