1. General information
Thank you for purchasing our product. Please read the instructions carefully and for future reference please keep it in a safe place. It contains
important information to help you use the product safely.
2. Safety instructions
• Before you start using the product, make sure you follow the instructions, assembly has been carried out correctly.
• Do not use the product until you are sure that all parts are working properly, not missing, fits properly, is in the correct position and all
mechanisms are working.
• To avoid injury, make sure that you keep your child away from the product when unpacking and assembly of the product.
• The colour and contents may be different from those shown on the packaging.
• Do not stand on this product. You may fall or cause product to tip.
• Keep away from open fire! Be aware that fire or any heat-producing device can damage the product.
• Attention! Keep product packaging out of reach of children and babies! If you do this, you can prevent the risk of choking!
• Please keep the packaging for future reference.
• Keep the escort card!
3. Installation
1. Orient each Panel so that the slots open on top.
2. Place each Panel against the mounting surface and line up with a level (sold separately).
3. Mark 4 mounting holes, each board. Ensure there is enough space on the wall to fit all boards if required. NOTE: It is recommended that all 4
screws are used to mount each board.
4. Check the mounting area for hidden wiring or pipes, drill holes using a suitably sized drill bit [recommended bit size 6mm].
5. Place the Wall Plugs provide in each drilled hole. Place the Panel and align holes, use Screws provided fix to wall. Do not over tighten screws.
6. Repeat for each panel, make sure each panel is aligned by using the tabs on the sides of each panel.
