background image

1

© 

2019 

ClosetMaid 

LLC 

| Ocala, FL 34471 | 1-800-874-0008 | www.closetmaid.com | www.closetmaid.ca

WEIGHT CAPACITY:

2845    

3/19

    

01-

11556-00

Pantry Organizer

Rangement pour garde-manger

Organizador de despensa

Items you will need to provide for assembly:

Articles que vous devrez fournir pour le montage:

Elementos que necesitará para el montaje:

NOTE:

 For this organizer to meet weight load 

performance specifications as advertised please read 

the following. At least 3 screws (in the noted location 

on pg. 7) must hit studs in the hang track as well as 

the 3 screws in the middle standards for this kit to be 

considered installed properly and have guaranteed 

weight holding capacity.

If 

any

 components are altered / not used / and/or 

removed the weight load specifications are no longer 

valid.

Unit MUST be installed as per the the 

installation instructions begining on page 7 

to satisfy published weight load capacity.

FRENCH:

 For this organizer to meet weight load 

performance specifications as advertised please read 

the following. At least 3 screws (in the noted location 

on pg. 7) must hit studs in the hang track as well as 

the 3 screws in the middle standards for this kit to be 

considered installed properly and have guaranteed 

weight holding capacity.

If 

any

 components are altered / not used / and/or 

removed the weight load specifications are no longer 

valid.

Unit MUST be installed as per the the installation 

instructions begining on page 7  

to satisfy published weight load capacity.

SPANISH:

 For this organizer to meet weight load 

performance specifications as advertised please read 

the following. At least 3 screws (in the noted location 

on pg. 7) must hit studs in the hang track as well as 

the 3 screws in the middle standards for this kit to be 

considered installed properly and have guaranteed 

weight holding capacity.

If 

any

 components are altered / not used / and/or 

removed the weight load specifications are no longer 

valid.

Unit MUST be installed as per the the installation 

instructions begining on page 7  

to satisfy published weight load capacity.

Up to 1000 lbs per system

83.33 lbs per bracket

* Per stud installation pg. 7

1/4” & 1/2” 

diameter 

drill bits.

Содержание SHELFTRACK 2845

























Отзывы: