PEP Modular Computers CP331, Руководство пользователя

Страница: 31 / 44

CP331 Functional Description
ID 19947, Rev. 0200 Page 2 - 7
©
2000 PEP Modular Computers GmbH
PanelLink Interface
Figure 2-4: Orientation of PanelLink Connector
Another possibility for remote flatpanel connections (up to 5m
distance) is the PanelLink interface of the board variant CP331-
PL. A small transition board, the so-called PanelLink Adapter
Module, is equipped with a PanelLink transmitter to provide this
feature. The transition board is be plugged into the internal TTL
flatpanel connector CON8. Resolutions up to SXGA quality
(1280 x 1024) are possible. The installed PanelLink transmitter
is the Silicon Image SiI150.
The front-end connector is a 20-pin Mini-Delta Ribbon (MDR)
connector which provides all required signals including the 5V
power supply line for flat-panels.
The pinouts of the PanelLink connector are shown in the following table.
N/C = Non connected.
Table 2-3: PanelLink Connector Pinouts (Transmitter Side)
Pin Signal Pin Signal
1 TX1+ 11 TX2+
2 TX1- 12 TX2-
3 SHLD1 13 SHLD2
4 SHLDC 14 SHLD0
5 TXC+ 15 TX0+
6 TXC- 16 TX0-
7 GND 17 N/C
8 5Vt 18 N/C
9 N/C 19 DDDAT0
10 N/C 20 DDCLK0