Page 8
Pentek Model 78741 Installation Manual
Rev.: 2.5
1.6
Specifications
71741 XMC Signal Processing
Refer to the
Model 71741 Operating Manual
, Pentek document 800.71741.
Carrier XMC Interface
Compliance:
VITA 42.0 XMC Standard
Primary XMC Connector,
J15
:
P15 Connectivity:
One PCIe x8 link direct to the PCIe bus
XMC pins MSDA & MSCL connected to PCA9535
for control inputs to FireFly connectors
Speed:
PCIe link supports Gen3 data rates
Secondary XMC Connector,
J16
:
(Option 105)
P16 Connectivity:
Two x4 gigabit serial I/O links routed as follows:
Eight serial receive lines wired from
J16
to
FireFly serial connector
J24
(
SER RX
)
Eight serial transmit lines wired from
J16
to
FireFly serial connector
J25
(
SER TX
)
Speed:
Dual x4 links support data rates up to 5 Gbps
Carrier PMC Interface
(Option 104)
PMC Connector:
64−pin PMC standard connector,
J14
J14 Connectivity:
48 I/O lines directly wired to
GPIO
connector
for 71741 user I/O
Nominal Power Consumption
1
PCIe Carrier:
With no XMC:
6.35 Watts typ (9.31W max)
71760 XMC:
+3.3V
VPWR (12V or 5V Total Power
XC7VX330T (Option 073)
3.22A 2.54A@12V or 6.1A@5V 41.12W
XC7VX690T (Option 076) 3.05A 2.79A@12V or 6.7A@5V 43.52W
Physical
Form Factor:
PCIe Carrier, half−length PCIe add−in card
Height:
111.15 mm (4.376 in) (including PCIe connectors)
Length:
167.65 mm (6.60 in)
Weight
PCIe Carrier:
110 grams (3.9 oz)
XMC Module:
Approximately 14 oz (400 grams), with 2−slot heat sink
1. With factory IP at the maximum clock rate.
