Page 2
Pentek Model 78741 Installation Manual
Warranty
Pentek warrants that all products manufactured by Pentek conform to published Pentek specifications and are free from defects in mate−
rials and workmanship for a period of one year from the date of delivery when used under normal operating conditions and within the
service conditions for which they were furnished. The obligation of Pentek arising from a warranty claim shall be limited to repairing or at
its option, replacing without charge, any product that in Pentek’s sole opinion proves to be defective within the scope of the warranty.
Pentek must be notified in writing of the defect or nonconformity within the warranty period and the affected product returned to Pentek
within thirty days after discovery of such defect or nonconformity. Buyer shall prepay shipping charges, taxes, duties and insurance for
products returned to Pentek for warranty service. Pentek shall pay for the return of products to buyer except for products returned from
another country.
Pentek shall have no responsibility for any defect or damage caused by improper installation, unauthorized modification, misuse, neglect,
inadequate maintenance, or accident, or for any product that has been repaired or altered by anyone other than Pentek or its authorized
representatives.
The warranty described above is buyer’s sole and exclusive remedy and no other warranty, whether written or oral, is expressed or
implied. Pentek specifically disclaims fitness for a particular purpose. Under no circumstances shall Pentek be liable for any direct, indi−
rect, special, incidental, or consequential damages, expenses, losses or delays (including loss of profits) based on contract, tort, or any
other legal theory.
Copyrights
The contents of this publication are Copyright © 2013−2015, Pentek, Inc. All Rights Reserved. Contents of this publication may not be
reproduced in any form without written permission.
Trademarks
Pentek, Onyx, GateXpress, GateFlow, and ReadyFlow are registered trademarks of Pentek, Inc.
PCI, PCI Express, PCIe, and PCI−SIG are trademarks or registered trademarks of PCI−SIG.
PLX and the PLX logo are registered
trademarks of PLX Technology, Inc. Xilinx and Virtex are registered trademarks or trademarks of Xilinx, Inc. FireFly is a trademark of
Samtec, Inc.
Manual Revision History
Date
Revision
Comments
12/12/13
0.1
Initial release.
3/12/14
1.0
Revised the default maximum speed to Gen 3 in
.
5/8/14
1.1
Removed references to Model 71740. Revised references to user manuals.
7/17/14
2.0
Revised for Pentek 7807 PCIe carrier in place of 7806 carrier. Revised
to resolve KB Case 1440.
9/16/14
2.1
Removed the “factory use only” statement from
10/13/14
2.2
, corrected the estimated power consumption.
, corrected analog full−scale input: +2
dBm to +4 dBm, programmable.
, corrected analog signal inputs IN2 and IN1 operation and use.
3/12/15
2.3
, revised the power consumption specification.
7/22/15
2.4
, added Pentek model number for connector.
11/9/15
2.5
, updated GPIO connector mating cable identifier.
Printed in the United States of America.
