Pentek FreshPoint U440, Руководство по обслуживанию, Страница: 2 / 36

Installation & Start-Up Checklist ............................................................................................................................ 3
Product Specifications & Important Information .................................................................................................... 4
Safety, Cautions, & Warnings ................................................................................................................................ 5
Flushing Schedule & Installation Instructions ........................................................................................................ 6
Installation Instructions .......................................................................................................................................... 7
Basic Programming Quick Reference Guide ....................................................................................................... 22
Programming ....................................................................................................................................................... 23
Service & Maintenance........................................................................................................................................ 29
Troubleshooting ................................................................................................................................................... 31
Flow Rate vs. Driving Pressure ........................................................................................................................... 33
Table of Contents
IMPORTANT PLEASE READ:
The information, specifications and illustrations in this manual are based on the latest information available at the time of printing.
The manufacturer reserves the right to make changes at any time without notice.
This product should be installed by a plumbing professional.
This unit is designed to be installed on potable water systems only.
This product must be installed in compliance with all state and municipal plumbing and electrical codes. Permits may be required
at the time of installation.
If daytime operating pressure exceeds 80 psi, nighttime pressures may exceed pressure limits. A pressure reducing valve must be
installed.
Do not install the unit where temperatures may drop below 32°F (0°C) or above 104°F (40°C).
Do not place the unit in direct sunlight.
Do not strike any of the components.
Warranty of this product extends to manufacturing defects of the vessel and controller, not the membrane. Misapplication of this
product may result in failure to properly condition water, or damage to product.
A prefilter should be used on installations in which free solids are present.
In some applications local municipalities treat water with Chloramines. High Chloramine levels may damage system components.
Correct and constant voltage must be supplied to the controller to maintain proper function.
•
•
•
•
•
•
•
•
•
•
•
•