7
5
Click [Finish].
Reboot your computer after the screen closes.
6
Turn your camera off and plug the USB cable into your
camera and into an available USB port on your computer.
7
Turn your camera on.
Your computer will automatically detect the camera as new
hardware and window will display a notification confirming
[Hardware Found : PENTAX OPTIO S4i] (Windows XP) or [Search
for the best driver for your device (Recommended)] (Windows 98 /
98SE / Me / 2000) in the task bar recognized area to begin the
installation.
8
Double-click [My Computer] on the desktop.
When the installation is completed, your camera can then be found
in the [My Computer] window as [Removable Disk].
Make sure that “Removable Disk” is displayed in the [My computer]
window.
Confirm that the USB Connection mode is set to [PC] before
connecting the USB cable. (
1
p.9)
In the case of Windows XP, if the SD Memory Card has a volume
label attached, the content of the volume label will be displayed
instead of [Removable Disk]. If the SD Memory Card is new and has
not been formatted, the manufacturer and capacity of the card may
be displayed.
e_00_pc_kb364.book Page 7 Tuesday, February 10, 2004 7:32 PM
