Pentax MZ-6, Руководство по эксплуатации

Страница: 76 / 77

For customers in the USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment.
This equipment has been tested and found comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
not cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian
Interference - Causing Equipment Regulations.
Pour les utilisateurs an Canada
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
●
Flash Series-control, Retractable TTL Auto Flash (RTF), Guide num-
ber:11 (ISO100/m), Illumination angle covers 28mm lens angle
of view, Flash-sync-speed in the range from 1/125 to a slower
speed, Slow-speed-sync flash, Contrast-control-flash sync
(ISO range=25-800), Auto pop-up, Red-eye reduction flash
function
●
Flash sync Hot shoe with X-contact with couples with Pentax dedicated
auto flashes, ISO range=25-800, Flash-sync-speed in the
range from 1/125 to a slower speed. Possible to use high-
speed sync, wireless flash mode, P-TTL mode with
AF360FGZ.
●
Pentax function 11 user-defined functions
●
Power source Two 3V lithium batteries (CR-2 or the equivalent)
●
Battery Exhaustion Battery exhaustion symbol [ ] is lit. (The shutter is locked and
Warning
no indication in the viewfinder when starts blinking)
●
Dimension 135.5mm(W)
×
92mm(H)
×
63mm(D) (5.3”
×
3.6”
×
2.5”)
and Weight 400g (14.1 oz) body only without batteries
●
Supplied Hot Shoe Cover F
K
, Release Socket Cap , Camera Strap F
K
Accessories Eye Cup F
K
, Finder Cap
Data Back F
J
Cover Crystal quartz controlled; LCD with digital clock, auto calendar
(optional) up to 2049.
●
Data printout 7-segment, 6-digit LCD
●
Printout “ – ”indication blinks for a few seconds on LCD panel.
confirmation
●
Printing mode q Year/month/day, w day/hour/minute, e “ --- ”,
r month/day/year, t day/month/year
●
ISO range ISO 25–1600 (automatic setting)
●
Power source CR2025 (lithium battery)
●
Number of prints Approx. 5,000
SPECIFICATIONS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTIFICATION OR ANY
OBLIGATION ON THE PART OF THE MANUFACTURER.
130 131
APPENDIX
MZ-6(E)06 F2/119-133 11/8/02 12:13 PM Page 130