Pentax MZ-6, Руководство по эксплуатации

Страница: 5 / 77

Other precautions
• The temperature range at which this camera functions properly is 50°C to -
10°C (122°F to 14°F).
• A camera which has been submerged in water usually cannot be repaired. If
such an accident should occur, it is advisable to contact a Pentax Service
Center immediately.
• To maintain optimum performance, it is recommended that the camera be
inspected every one or two years. If the camera has not been used for an
extended period, or is being prepared for an important photographic session,
it is recommended that you have the camera inspected or test shoot with it.
• Repairs deemed necessary due to usage of this product in an industrial or
commercial application may not be covered under the terms of the Pentax
warranty.
• The PENTAX warranty provides only for the repair of defects in materials or
workmanship. Damage of any kind cannot be repaired at no charge under
the terms of the warranty. If the difficulty is caused as a direct result of the
product being used in conditions as outlined in the "Precautions for Your
Camera" section or any other operation contrary to the instructions outlined
in this manual, charges will be assessed and a repair quotation will be pro-
vided.
• Use two 3V lithium batteries (CR-2 type).
• Misuse of the battery can cause hazards such as leakage, overheating,
explosion, etc. The battery should be inserted with the "+" and "-" sides fac-
ing correctly.
• Battery performance may be temporarily hindered in low temperatures, but
will recover in normal temperatures.
• Keep a spare battery on hand for replacement convenience when shooting
outdoors or while traveling.
• If the built-in flash is used continuously, the battery may become warm, but it
does not mean that the battery is faulty; it is one of the battery's characteris-
tics.
• Replace the batteries at the same time. Do not mix battery brands, type or
an old battery with a new one. It may cause explosion or overheating.
Your Pentax camera is a high-precision mechanism. Handle it with great care.
Precautions when taking pictures
• Do not use the camera where it may come in contact with rain, water, or any
other liquid, because the camera is not weather, water, or liquid resistant.
Should the camera get wet from rain, splashing water, or any other liquid
wipe it off immediately with a dry soft cloth.
• Do not drop the camera or allow it to hit solid objects. If the camera suffers a
shock or impact, take it to a Pentax service center for inspection.
• Be careful not to subject the camera to strong vibrations, shock or pressure.
Use a cushion to protect the camera when carrying it in a motorcycle, car,
boat, etc.
• Condensation on the interior or exterior of the camera may be extremely
harmful to the camera mechanism as it may cause rust. Furthermore, if the
camera is taken from warm temperature to a subfreezing one or vice versa,
the formation of crystals may cause damage. In such a case, put the camera
into a case or plastic bag so that any changes in temperature difference is
minimized. Do not remove it from the bag until temperature has stabilized.
• Regular size color prints may cut off what appears on the extreme edges of
the film frame. Compose your picture with a margin of safety at the edges.
• When a macro or telephoto lens is attached to the camera, the top part of
the viewfinder may look dark due to the lens blocking the mirror. However,
this does not affect the picture taken.
Precautions for storage
• Avoid leaving the camera for extended periods in places where the humidity
and temperature are very high, such as in a car.
• Do not store the camera in a closet with moth balls or in an area where
chemicals are handled. Store it in a place with good dry air circulation to pre-
vent the growth of fungus.
Precautions for proper care
• Never touch the shutter curtain or mirror with your finger or any other object.
• Use a blower and lens brush to remove dust accumulated on the lens or
viewfinder.
• Never use solvents such as paint thinner, alcohol or benzene to clean the
camera.
• Electrical problems may often be caused by water, dirt or dust at points of
electrical contact. Also check for battery leakage, traces of dirt or grease, or
corrosion due to salinity or gas. If you cannot correct the problems, have your
camera inspected at a Pentax service center. Repairs of this nature are not
covered under the terms of the warranty and charges may be assessed.
2 3
PRECAUTIONS FOR YOUR CAMERA
PRECAUTIONS FOR BATTERY USAGE
MZ-6(E)01/001-010 11/8/02 11:49 AM Page 2