Pentax MZ-6, Руководство по эксплуатации

Страница: 51 / 77

87
Flash mode display
The flash fires in accordance with the flash mode indicated on the LCD
panel.
Icon displayed Flash mode Flash status
Flash ON Flash fires when you press the
shutter release button.
Flash ON + Red-eye reduction
When the flash is fired in the flash ON
mode, red-eye reduction takes
effect.*
1
Auto pop-up If the Auto Picture Mode or Picture
Mode is set, the flash pops up
automatically when necessary.
+
Auto Pop-up + Red eye reduction
When the flash is fired in the
auto-pop up flash mode, red-eye
reduction takes effect. *
1 , * 2
Wireless Set when using a dedicated
wireless flash.
p.100
+HS
Wi High-speed sync
Set when using high-speed sync with
a dedicated wireless flash.
p.99
*1: If red-eye reduction is used while the AF360FGZ, etc. is set as a
slave unit, the preflash for red-eye reduction will trigger the slave unit
to fire. When using a slave unit, do not use red-eye reduction.
*2: The auto pop-up mode will work in any mode except Auto Picture
Mode or Picture Mode. ( p.86).
Memo Memo
USING THE BUILT-IN FLASH
STEP UP
FLASH PHO
T
OGRAPHY
86
USING THE BUILT-IN FLASH
This section explains how to set the built-in flash modes
and notes concerning the built-in flash.
SETTING THE FLASH MODE
Press the flash mode button until the desired flash mode
appears on the LCD panel.
The flash mode will be displayed on the LCD panel as shown
below.
• Auto pop-up flash [ ] can only be selected in the Auto Picture
Mode and Picture Mode.
MZ-6(E)05 E1/085-094 11/8/02 12:06 PM Page 86