7
Ap
pend
ix
127
1
Attach the GPS unit to the camera and turn the
camera on.
2
Select [ASTROTRACER] in
A
3 menu and press
D
.
The [ASTROTRACER] screen appears.
3
Select [ASTROTRACER] and press
D
.
4
Select [On] and press
E
.
5
Select [Precise Calibration] and press
D
.
The [Precise Calibration] screen appears.
6
Rotate the camera
according to the
instruction displayed on
the monitor.
The result of calibration appears.
7
Press
E
.
The screen of Step 4 reappears.
If [The operation could not be completed correctly] appears,
change the camera direction and perform a calibration
again.
8
Press
F
twice.
The camera returns to standby mode.
u
Caution
• When performing a calibration, be careful not to drop the
camera. Wrap the strap around your wrist or take other
preventive measures.
• If the battery is removed, perform a calibration again after the
battery is put back in.
• As the magnetic field environment varies depending on the
shooting location, a precise calibration must be performed at
each location when shooting images of celestial bodies with
ASTROTRACER.
• Changing the lens or the angle of the monitor after performing
a calibration may have some effect on the magnetic field
environment. In this case, perform a calibration again.
Shooting Celestial Bodies
(ASTROTRACER)
Setting the ASTROTRACER
A
3
Enables ASTROTRACER function
Enables ASTROTRACER function
in Bulb mode to eliminate star
in Bulb mode to eliminate star
trails during timed exposures
trails during timed exposures
ASTROTRACER
ASTROTRACER
ASTROTRACER
ASTROTRACER
Precise Calibration
Precise Calibration
Cancel
Cancel
OK
OK
Rotate camera in each of three
Rotate camera in each of three
directions ensuring that each
directions ensuring that each
rotation exceeds 180 degrees
rotation exceeds 180 degrees
Precise Calibration
Precise Calibration
Stop
Stop