Pentax 205571 - PocketJet 3 Plus B/W Direct Thermal Printer, Руководство пользователя

Страница: 71 / 98

possible, replace the interface cable with another and permanently
replace it if it is defective.
Pages Don’t Print
The green DATA indicator remains lit but does not
blink
The print buffer contains unprinted data from the software application.
If you have already inserted paper in the printer, take the paper out and
re-insert it to make sure the printer knows paper is ready. If that
doesn’t work, you may need to turn the printer off, turn it back on, and
restart the print job.
If paper has not already been inserted into the printer, insert a new
sheet of paper and the print job should proceed.
An ASCII text application has not finished a text line with a CR/LF or
form feed, and the printer does not know the line is complete. Printing
another page or manually form feeding using the main switch may
finish the page correctly
The application should be sending data to the printer,
but the green DATA indicator is not lit
Make sure the interface cable is properly connected to both the printer
and the host computer, or that the infrared unit is properly connected
and oriented toward the infrared unit on the computer. See page 14,
“Connecting to your Computer.”
Pages Are Partially Printed
The green DATA indicator light goes out while a page
remains in the printer
The software application may not have sent a full page of data. Restart
the print job.
The application may have sent the wrong information about page size
or you may have put in the wrong paper size. Check the application
and the print driver for the proper page size. Check to be sure the
application and the page you are inserting in the printer are the same.
Adjust one or the other if necessary.
Page 61