Pentax 17811 - K-7 Digital Camera SLR, Руководство по эксплуатации

Страница: 310 / 336

308
App
e
ndi
x
10
The
autofocus
does not
work
The focus mode is
set to
\
Set the focus mode lever to
l
or
A
.
(p.118)
The focus mode is
set to
k
Autofocus is not locked (focus lock) when
the focus mode is set to
k
(
A
). The
camera will continue focusing on the subject
while the shutter release button is pressed
halfway. If there is a subject that you wish to
focus on, slide the focus mode lever to
l
and use the focus lock. (p.124)
AE lock
function
does not
operate
AE lock is not
available when set
to B ,
p
or M mode.
Set the exposure mode to any mode other
than
B (Green),
p
(Bulb) or M (Flash X-
sync Speed).
The flash
does not
discharge
The exposure mode
is set to B mode
Only C (Auto Flash Discharge) and D
(Auto Flash+Red-eye Reduction) are
available for the flash mode when the
exposure mode is B (Green). The flash will
not discharge when the subject is bright in
these modes. In the exposure modes other
than B , only the flash mode that
discharges every time the flash recharges is
available. Try different exposure modes.
The USB
connection
with a
computer
does not
work
properly
The USB connection
mode is set to [PTP]
Set [USB Connection] in the [ R Set-up 2]
menu to [MSC]. (p.275)
Refer to the provided “Quick Guide” for
details on connecting the camera to a
computer.
Shake
Reduction
does not
work
The Shake
Reduction function
is off
Set [Shake Reduction] in the [
A
Rec. Mode
4] menu to
k
(On). (p.132)
The Shake
Reduction function
is not set properly
If a lens for which focal length information
cannot be obtained is used, set [Focal
Length] in the [Input Focal Length] menu.
(p.135)
Shutter speed is too
low for the Shake
Reduction function
to be effective when
panning or shooting
night scenes, etc.
Turn off the Shake Reduction function and
use a tripod.
The subject is too
close
Move away from the subject, or turn off the
Shake Reduction function and use a tripod.
Problem Cause Remedy