191
5
U
s
ing
the
Flas
h
Set the camera to wireless flash mode when using an external flash in
combination with the built-in flash.
1
Press the four-way controller (
3
).
The [Flash Mode] screen appears.
2
Select
r
and press the
4
button.
The camera is ready to take a picture.
The channel for the built-in flash is
displayed in the viewfinder and on the
LCD panel. The factory default setting is
CH1.
Using the Built-in Flash in Wireless Mode
•
r
cannot be set when the exposure mode is set to
B
(Green).
• When the drive mode is set to
i
(Remote Control (3s delay)),
d
(Mirror
Lock-up) or
e
(Mirror Lock-up remote control), or the lens aperture is not
set to the
s
position,
r
cannot be selected.
Flash Mode
Wireless Mode
Cancel
OK
OK
MENU
0.0
Changing the Built-in Flash Discharge Method
You can change the built-in flash discharge method used in wireless
mode.
Set in [21. Flash in Wireless Mode] of the [
A
Custom Setting 3] menu
1
On
Discharges the built-in flash as a master. (default
setting)
2
Off
Discharges the built-in flash as a control flash.
HS
b
(High-speed flash sync) is not available with the built-in flash.
Содержание 14748
