![background image](http://html1.mh-extra.com/html/pentair/sta-rite-digital-pt8/sta-rite-digital-pt8_instruction-manual_1524974014.webp)
12
EN
The following table summarises the meaning of the different elements of the interface where:
USER INTERFACE
CHAPTER 4
ELECTRICAL CONNECTION
Before carrying out any manipulation inside the appliance, it must be disconnected from the electrical mains. Incorrect connections
can damage the electronic board. The manufacturer is not deemed to be responsible for damage caused by incorrect connections.
Verify that the power supply is between 110-230V. If the version without cables has been purchased, follow the indications of diagram B:
•
Use H07RN-F 3G1 or 3G1.5 cables
according to the established power.
•
Connect U, V y to the motor.
•
O means led on.
•
Connect L1, N y to the mains.
•
The earthing conductor must be longer
than the others. It will be the first to
•
( ( O ) ) means slow intermittence.
be connected during the connection
process and the last to be detached
during disconnection. Earthing
conductor connections are mandatory.
•
(((O))) means fast intermittence.
The electrical connection must be performed by qualified personnel in accordance with the regulations of each country.
DANGER - ELECTRIC SHOCK RISK
DISPLAY
ACTION
OPERATION MODE
It shows instantaneous pressure or instantaneous current consumed
SET-UP MODE
It shows intermittent starting pressure.
It shows intermittent stopping pressure.
It shows intermittent nominal intensity
ALARM MODE
It shows the alarm code
LOW CONSUMPTION MODE
It shows 3 flashing points
BASIC CONFIGURATION
It shows the basic parameters of the configuration
ADVANCED CONFIGURATION
It shows the advanced configuration window
LED
STATUS
ACTION
bar
0
It indicates instantaneous pressure in bar
( ( O ) )
It indicates instantaneous pressure in bar + pump started
psi
0
It indicates instantaneous pressure in psi
( ( O ) )
It indicates instantaneous pressure in psi + pump in operation
A
0
Indicates the instantaneous current consumed in Ampere
( ( O ) )
Pump ON
start
0
It displays the operating pressure
( ( O ) )
Operating pressure setting
stop
0
Stop pressure display
( ( O ) )
Stop pressure setting
0
Alarm insufficient water or definitive overcurrent.
( ( O ) )
Alarm insufficient water with ART activated or overcurrent making attempts at restoration
(((O)))
Rapid cycle alarms
Содержание Sta-Rite DIGITAL PT8
