SPACOMMAND
®
Spa-Side Remote Installation and User’s Guide
10
UPGRADE EXISTING iS10 REMOTE
(SURFACE MOUNT INSTALLATION)
Upgrade an existing iS10 remote
The following describes how to replace a Pentair Aquatic Systems iS10 remote with the
spa-side remote. The existing iS10 mud-box is compatible with the spa-side remote.
Step 1: Remove the iS10 remote
To remove the iS10 (surface and recess mount):
1.
Surface mount installation:
Gently pull the front of the iS10 remote away
from the bracket that is attached to the spa wall and remove the. Remove the
rubber skirt ring and discard. Remove the four screws securing the bracket to
the spa wall. Discard the bracket and iS10 remote.
Bracket
Rubber skirt ring
Recess mount installation (with mud-box):
Gently pull the front of the iS10
remote away from the bracket that is attached to the mud-box and remove the
remote. Remove the two screws securing the bracket to the mud-box. Discard
the bracket and iS10 remote.
2.
Cut the iS10 communication wire at the rear of the remote. Leave enough
cable slack to attach the new remote cable.
Screw (x4)
Cable
Screw (x2)
Bracket
Mud-box
Cable
iS10 remote
iS10 remote
