Pentair MICROBRITE, Инструкция по установке и эксплуатации

Страница: 12 / 72

MicroBrite Color and White Light Installation and User’s Guide MicroBrite Color and White Light Installation and User’s Guide
8
WET CONDUIT INSTALLATION
(Continued)
Continue to Light Wiring Installtion on page 10.
Installation Tool
1-1/2” Standard
Wall Fitting
Light Cable to Junction Box
7. Place Microbrite light installation tool (P/N 602158) over the front of the light
while turning the tool and light clockwise.
Note: If the light does not turn smoothly, pull the light slightly out and be sure
that it’s seated properly and the wall fitting is free of debris, then reinstall the
light.
8. Turn the light clockwise while threading it into the wall fitting to un-twist the
power cord.
9. Turn the light clockwise (approximately 5 turns) so that it is threaded tightly into
the wall fitting.
10.
Note: Once the light is tightly installed remove the tool be sure the light
cannot be unscrewed using your fingers. The light should be secured in
place so that it can only be removed by using the light installation tool.