Pentair MICROBRITE, Инструкция по установке и эксплуатации

Страница: 10 / 72

MicroBrite Color and White Light Installation and User’s Guide MicroBrite Color and White Light Installation and User’s Guide
6
MicroBrite™ Color and White LED Light Installation
The MicroBrite light adaptor allows the mounting of the MicroBrite Light in the 1-1/2”
return fitting. Refer to the Compatible MicroBrite Light Wall Fittings table above.
Compatible Wall Fittings
Part No Description
86205100 Pentair
542429 Pentair
542402 Pentair
542414 Pentair
86205100 Pentair
542405 Pentair
542404 Pentair
Part No . Description
SP1022 Hayward
™
215-9170B WaterWay
®
400-9150B WaterWay
215-9890B WaterWay
400-9170B WaterWay
CMP25550001060 CMP
CMP25522100000 CMP
CMP25550000000 CMP
WET CONDUIT INSTALLATION
1. To install a MicroBrite Light, route the MicroBrite light power cord light cable
through the 1.5” wall fitting to the location of the 12 VAC pool transformer or
junction box.
2. Wrap plumber’s thread sealant tape around the male threads on the white
threaded adaptor ring on the light.
3. Pull the MicroBrite power cord through the conduit so there is approximately
three to six inches of visible cord between the body of the MicroBrite light and
the wall fitting.
Note: MicroBrite lights are shipped from the factory with the white threaded adaptor
ring pre-installed onto the body of the light. The male threads on the white threaded
adaptor ring allow the light to be threaded into the female threads of most 1-1/2”
(1.5”) pool wall return fittings. To install the MicroBrite Light wall fitting into a
concrete/gunite pool:
Continue to Step 4 on next page.
Wrap threaded sealant
tape around the
adaptor
1-1/2” Standard
Wall Fitting
FOR FIBER OPTIC RETROFIT APPLICATIONS SEE PAGE 10.