MAGICSTREAM® Deck Jet II Water feature Installation Guide
3
Installation
The MagicStream
®
'HFN-HW,,ZDWHUIHDWXUHERG\LVGHVLJQHGWREHFRQQHFWHGWRD´6FK39&
pipe (Figure 2). After the pipe is pressure tested, solvent weld the body to the 3/4” supply pipe.
NOTE: Use PVC/ABS glue only
. Anchor the MagicStream
®
Deck Jet II body, with the cover attached,
VRWKHFRYHULVOHYHOZLWKWKH¿QLVKHGGHFNVXUIDFH
2QFHWKHGHFNLV¿QLVKHGÀXVKDQ\GHEULVIURPWKHVXSSO\SLSHXVLQJWKHSXPSDQG¿OWHUV\VWHP
that supplies the MagicStream
®
Deck Jet II water feature. Apply threaded seal tape to the threads of
the swivel base. Remove any debris from the cup and screw the swivel base into the Deck Jet body
(Figure 2).
By hand, push the swivel nozzle until it snaps onto the swivel base (Figure 3).
Operation
Start the pump and adjust the appropriate valves as necessary to create the desired water effect.
,IWKHVWUHDPRIZDWHULVGLVUXSWHGUHPRYHWKH&RYHU-HWDQG-HW6ZLYHO%DVH&KHFNWRVHHLIWKHUH
is any debris blocking the jet.
Swivel nozzle
Swivel base
¾” Sch40 pipe slip
connection
Figure 2
¾” supply pipe
Figure 3
Solvent weld ¾” supply
pipe to ¾” Sch40 pipe
slip connection
Swivel base
Attach thread seal tape to the
swivel base and screw the
swivel base into the Deck Jet
By hand, push the swivel
nozzle on to the swivel base
until it snaps into place
