4
Step 2. Attach The Seal
Your Kreepy Krauly comes equipped with one of
two seals.The Pleated seal is our universal seal and
works in
all
pool types: concrete, vinyl, fiberglass,
and tile. And our Starfish seal which is used
exclusively in concrete pools only.
To install either seal locate the words
“This Side
Up”
and face them towards the main body. Slip
the seal over the footpad – (flat side down towards
pool floor) and pull gently until it seats itself on the
other side in its groove, as illustrated in Figure 3.
The seal must be installed flat side down, pleated/
contoured side up.
Once in place, the seal should
rotate and turn freely.
The seals are not reversible.
The raised pleats on
the Pleated seal and the contours on the Starfish
seal must face upward. The flat side of the seal
should face down to rest against the pool surface.
Step 3. Attach The Roller Bumper Strap
Insert the bottom end of the strap into the slot
provided on the main body. Insert the top end of the strap into the locking clip attached to the swivel
head. See Figure 4.
Step 4. Attach The Dive Float Restrictor
Snap the dive float restrictor into the lower U-shaped brace between the dive floats. Make sure the
locking tabs on both sides of the dive float restrictor snap securely into place. See Figure 5.
Pleated/Starfish Seals in their Grooves
Flange
Dive Float
Dive Float
Restrictor
Locking
End Clip
Swivel
Head
Main
Body
Flat Tab
Main
Body
Main
Body
Pleats of
Pleated Seal
The flat side of seal faces down to rest on the pool’s surface.
(For Concrete Pools Only)
Figure 3
Figure 4
Figure 5
13
VI. Kreepy Krauly Parts List
K12164
Dive Float Restrictor
K12157
Dive Float
K12181
Dive Float Clip Kit (2)
K12158
Weight Holder
K12160
Wing Set
K12896
Pleated Seal
K12059
Foot Pad
K12004
Automatic Regulator
Valve
K12161
Roller Bumper Strap Kit
(includes bumper roller
and end clip)
K12156C
Swivel Cone and Bearing
K12163
Drive Tube
Top/Bottom
(1)
K12156
Swivel Head Assembly
K12155
Main Body
-With Exchange Only
(Excludes Flapper)
“Insist on Genuine Kreepy Krauly Parts To Protect Your Warranty”
K12054
Hose Weight
K12961
Valve Cap
K12079
Threaded Compression
Adapter
K12087
Bearing Washer
Содержание Kreepy krauly
Страница 1: ......
