![background image](http://html1.mh-extra.com/html/pentair/intellipool/intellipool_user-manual_1524706004.webp)
2
English
GENERAL POINTS
- DANGER
- INSTALLERS, POOL SPECIALISTS AND OWNERS MUST CAREFULLY READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE USING
THIS PRODUCT.
- WARNING
- Most countries regulate the construction, installation and operation of public swimming pools and spas, and the construction of residential pools and spas. It is important
to comply with these regulations, many of which directly regulate the installation and use of this product. Consult your local building and health codes for more information
.
- CAUTION
- This installation and user guide contains important information on the installation, operation and safety of this product. This guide should be provided to the owner
and/or user of this product.
INSTALLATION
- DANGER
- RISK OF ELECTRIC SHOCK or electrocution
- BEFORE WORKING ON THIS DEVICE -
Always cut the supply to the device at the circuit-breaker before maintenance. Failure to do this may lead to death or serious injury to
service staff, pool users or others, due to an electric shock.
- DANGER
- SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS PRODUCT IS NOT INSTALLED AND USED CORRECTLY.
- WARNING
- Before installing this product, read and follow the warnings and instructions of this guide. Failing to follow these warnings and instructions may lead to serious
injuries, death or material damage. Refer to www.pentairpooleurope.com for more information linked to this product.
- WARNING
- Connect the device to a differential interrupter. If this system is used to control the underwater lighting devices, a differential interrupter must be installed upstream
of these devices. Conductors downstream of the differential interrupter shall not occupy conduits, junction boxes or enclosures containing other conductors, except if the
conductors are also protected by a differential interrupter. Refer to valid local codes for more details.
- WARNING
- This product must be installed by an authorised or certified electrician or a qualified swimming pool professional. All of the applicable installation codes and local
regulations must also be respected. Poor installation will create an electrical hazard which could result in serious injury or the death of pool users, installers or others due to
electric shocks, and may also cause damage to property.
- DANGER
- DISCONNECT THE SUPPLY CONNECTIONS BEFORE WORKING ON THIS DEVICE; ELECTRICAL POWER MAY BE SUPPLIED TO THE RELAY TERMINALS FROM OTHER SOURCES.
- CAUTION – CHEMICAL BURN HAZARD:
Make sure all pumps are switched off at the main circuit breakers at the domestic distribution board before drilling into any pipes. Set
rules for all handling related to electrical aspects, water and chemical products. Group the supply pumps and chemical product tanks in a safe and secured area.
- CAUTION -
Do not use this product to control an automatic swimming pool cover. There is a risk that swimmers could become trapped under the cover.
- CAUTION
– Devices which are not intended for use in single-family dwellings may require additional safety equipment to comply with local regulations.
- WARNING
– Except for remote controls, install components at a minimum of at least 1.5 m (5 feet) from the inside wall of the pool or spa.
- WARNING
- This product is intended for use in swimming pool applications only.
- CAUTION
- A sufficient equipotential connection (min. 4.5 mm2 recommended), in accordance with local regulations, is obligatory for all metal components of the swimming
pool, including the pool pump. This is necessary for the electrical safety as well as reduction of the corrosion risk.
IMPORTANT SAFETY GUIDELINES, READ AND FOLLOW ALL OF THE INSTRUCTIONS, KEEP THESE INSTRUCTIONS
USE
- DANGER
- DO NOT LET CHILDREN OPERATE THIS EQUIPMENT.
- CAUTION
– Strictly respect the safety and handling procedures from the acid manufacturers, including protective measures for hands, body and eyes during transferring and
using acid. Follow the prescribed safety precautions for handling muriatic acid intended for checking the water pH. Muriatic acid may cause serious physical harm and may
damage the swimming pool equipment. Extra care must be taken when installing, maintaining and operating the acid pump feed systems. Acid is dangerous to handle and should
be properly contained, transported, poured, stored and dispensed.
- CAUTION
– Check the pH and sanitizer levels of the water before using the pool and make sure the filtration device is not obstructed.
- CAUTION
– Periodically use an independent pH and chlorine testing kit to ensure that the pH and chlorine is at a safe level. If the pH and Oxidation Reduction Potential (ORP) or
conductivity probes are broken, depleted or dirty with oils, lotions, or other contaminants, they can report inaccurate results to the system causing incorrect water chemistry,
which could harm people or equipment.
- CAUTION
– Consult the device display daily to ensure there are no alarm messages.
- DANGER
– Water temperatures greater than 37.7° C (100° F) are a health hazard. Prolonged immersion in hot water may induce hyperthermia. Hyperthermia occurs when the
internal body temperature exceeds the normal temperature of 37° C (98.6 °F) by several degrees. Hyperthermia may produce the following effects: (1) Unawareness of impending
danger. (2) Failure to perceive heat. (3) Failure to recognise the need to leave the spa. (4) Physical inability to leave the spa. (5) Harm to the foetus in pregnant women. (6)
Unconsciousness leading to the risk of drowning. The use of alcohol, drugs or medicine is a factor which increases the risk of hypothermia in hot tubs and spas.
- WARNING
- When mixing acid with water, ALWAYS ADD THE ACID TO THE WATER. Never add water to the acid. When adding a chemical product to the swimming pool, carefully
follow the manufacturer instructions.
- DANGER -
DO NOT MIX SODIUM HYPOCHLORITE AND MURIATIC ACID.
- DANGER
- Keep standard solutions away from children, ensure that the bottles are securely closed, store them in a dry and ventilated location and do not let them freeze. The
pH 4 calibration solution is acidic.
- DANGER
- Batteries may contain dangerous substances. They should not be thrown into the bin, opened, thrown into fire or recharged, as there is a risk of explosion. Dispose of
the batteries in accordance with the manufacturer instructions. There is a risk of explosion if the battery is replaced by an incorrect type of battery. Handle a leaking battery with
gloves. Remove the batteries if the device is not used for an extended period of time.
- DANGER
- The remote control contains a CR2032 button battery. Do not ingest the battery. In the case of ingestion, the battery or button accumulator may cause severe internal
burns which can be fatal within just 2 hours. Store new and used batteries out of the reach of children. If the battery compartment does not close in a safe manner, stop using
the product and keep it out of the reach of children. If you suspect that a battery has been ingested or introduced into any part of the body, seek a medical opinion immediately.
- DANGER
- UV index information is supplied for information only and depends on the orientation and exposure of the radio relays.
For more information, we advise you to consult your dermatologist to inform you of the risks linked to your skin type.