INTELLIFLO
XF
®
and INTELLIPRO
XF
®
Variable Speed Pump Installation and User’s Guide
11
10
Entering Password
1. Press any button (besides the speed button) to prompt
the screen for a password.
2. To enter password, use the
Left
and
Right
arrows to
move the cursor and the
Up
and
Down
arrow button
to scroll through the digit then press
Enter
to confirm.
Setting Password
1. Check that the green power LED is on.
2.
Press
Menu
. Press
Select
to select “Settings”.
3. Use the
Up
or
Down
arrow to scroll to “Password”.
4.
Press
Select.
The default setting is “Disabled”.
5. To change this setting, press
Select.
Press
Up
or
Down
arrow to change the setting to “Enabled” and
press
Enter
to save.
6. Press the
Down
arrow. “Password Timeout” is
displayed.
7.
The factory default time is 10 minutes. This means
the IntelliFloXF
®
Variable Speed Pump will go into
Password Protection mode 10 minutes after the last
control panel key is pressed.
8.
Press
Select
to change time setting from 1 minute
to 6 hours and press
Enter
to save.
9.
Press
Down
arrow and then press
Select
on “Enter
Password” to change the password.
10.
Press the
Left
or
Right
arrows to move cursor and
press
Up
or
Down
arrow to change the password.
11.
Press
Enter
to save. To cancel any changes, press
Escape
to exit without saving.
MENU
SETTINGS
(1-16) Default: ADDRESS 1
(hr:mm) Default: 12:00 AM
Set AM/PM
AM/PM
24 hr.
Fahrenheit - Default: F°
C° Celsius
(1-5) Default 3
(450 RPM - 1700 RPM) - Default: 450 RPM
(1900 RPM - 3450 RPM) - Default: 3450 RPM
Pump Address
Set Time
Temperature Unit
Screen Contrast
Language
Set Min Speed
Set Max Speed
PASSWORD
Password Time Out (1 min. - 6 hours) Default:10 minutes
Disabled/Enabled - Default: Disabled
Enter Password (xxxx) Default: 1234
English - Default: English
Pump Menu: Settings
