Pentair Hoffman IW4000 Скачать руководство пользователя страница 4

Страница: 4 / 4

- 4 -

89116261

PH 763 422 2211

pentairprotect.com

All Pentair trademarks and logos are owned by Pentair or its global affiliates. Pentair reserves the right to

change specifications without prior notice.

De-burr the holes; remove any shavings and the
self-adhesive template

Degrease the front panel.

Fix infrared window

Align the fixing holes and firmly press the Infrared
Window into place.

With the correct sized screwdriver and three of the four
countersunk screws supplied, fix the window to
the panel.

Gradually advance each fixing until to torque setting
between 0.5 – 1 lbf.ft (0.68 – 1.36 N.m) is achieved and
units are secure.

STEP 7

STEP 8

Usage notes

To maintain enclosure type rating, viewport cover must be secured in place.

STEP

Содержание Hoffman IW4000

Страница 1: ...dous locations Before you start The installation may be carried out by using either a circular hole saw or a hydraulic hole punch Tools required 1 Hydraulic punch or hole saw 95 mm 95 5 mm 3 3 4 in 2...

Страница 2: ...confirmed the position of the unit select the drilling template Peel off the back and stick to the panel using the template reference points Center punch Using the center punch punch the fixing holes...

Страница 3: ...proceed to step 6 A If using the hole punch proceed to step 6 B Enlarging the center hole hole saw Using the 6 mm 1 4 in hole as a guide hole enlarge the center hole using the selected hole saw De bu...

Страница 4: ...e self adhesive template Degrease the front panel Fix infrared window Align the fixing holes and firmly press the Infrared Window into place With the correct sized screwdriver and three of the four co...