© 2014 Pentair Equipment Protection
- 3 -
89116261
PH 763 422 2211
pentairprotect.com
STEP 6a
STEP 6b
STEP 5
Drill fixing holes
Using the 3.6 mm (9/64 in.) twist drill,
drill out the fixing holes.
If using a hole saw, proceed to step 6(A).
If using the hole-punch, proceed to step 6(B).
Enlarging the center hole (hole saw)
Using the 6 mm (1/4 in.) hole as a guide hole,
enlarge the center hole using the selected hole saw.
De-burr all of the holes and treat as required.
Proceed to step 7.
Enlarging the center hole (hole punch)
Refer to the hydraulic punch manual and follow all
safety procedures.
Proceed to step 7.
STEP
5
STEP
6a
STEP
6b
