Pentair FLECKXT, Руководство по обслуживанию

Страница: 9 / 28

FLECK
XT Service Manual
• 9
MASTER PROGRAMMING MODE
CONTINUED
8. Volume Override
This program step is used to set the volume override of the unit.
• Press the Shift button to select the digit you want to modify.
• Press the Up or Down buttons to adjust this value.
• Press the Extra Cycle button.
9. Regeneration Day Override
This program step sets the maximum amount of time (in days)
the unit can be in service without a regeneration.
• Press the Shift button to select the digit you want to modify.
• Press the Up or Down buttons to adjust this value.
• Press the Extra Cycle button.
10. Regeneration Time
This program step sets the time of day for the regeneration to
occur in delayed systems.
• Press the Shift button to select the digit you want to modify.
• Press the Up or Down buttons to adjust this value.
• Press the Extra Cycle button.
11. Regeneration Cycle Step Programming
This program step programs the Regeneration Cycle step
times 1 through 5. Please refer to the chart below for
regenerant flow default cycle steps and times.
Regenerant
Flow
Cycle 1 Time Cycle 2 Time
Down Flow Back Wash 10 Minutes
Brine &
Slow Rinse
1 Hour
Back Wash
Filter
Back Wash 15 Minutes Draw 0
UF Variable
Fill
Brine &
Slow Rinse
10 Minutes
Pause &
Delay
1 Hour
Upflow
Brine &
Slow Rinse
1 Hour Back Wash 10 Minutes
Regenerant
Flow
Cycle 3 Time Cycle 4 Time
Down Flow
Rapid
Rinse
10 Minutes
Brine Tank
Fill
12 Minutes
Back Wash
Filter
Settling
Rinse
10 Minutes Refill 0
UF Variable
Fill
Variable
Rapid
Rinse
N/A
Brine Tank
Fill
12 Minutes
Upflow
Rapid
Rinse
10 Minutes
Brine Tank
Fill
12 Minutes
Regenerant
Flow
Cycle 5 Time
Down Flow N/A N/A
Back Wash
Filter
N/A N/A
UF Variable
Fill
Rapid
Rinse
10 Minutes
Upflow N/A N/A
12. Media Volume
This program step sets the volume of the media in the resin tank.
• Press the Shift button to select the digit you want to modify.
• Press the Up or Down buttons to adjust this value.
• Press the Extra Cycle button.
13. Salt Dosage
This program step sets the salt dosage in the unit.
• Press the Shift button to select the digit you want to modify.
• Press the Up or Down buttons to adjust this value.
• Press the Extra Cycle button.