Pentair FLECK 5810 XTR2 Скачать руководство пользователя страница 16

Страница: 16 / 36

Parameter

Description

Flow Rate

Displays the current flow rate.

Peak Flow

Displays maximum flow rate of water along

with date and time of occurrence, since last

reset.

Totalizer

Displays total volume of water used since

last reset.

Last Regen

Displays when last regeneration occurred.

Reserve

Displays the reserve volume based on the

reserve type selected under master settings.

*This parameter is only available for meter

delayed regeneration type.

Software Version

Displays the software version installed on

the controller.

No of Regens

Displays how many manually and system

initiated regenerations the system has gone

through since last reset.

Regen Interval

Displays the average length of time between

regenerations based on the past four

regenerations.

Daily Usage

Displays average water usage for each day of

the week based on the usage on that day for

the past six weeks.

Usage Since Regen

Displays water usage since last regeneration.

Last Setting Change

Displays the date and time of the last update

to Master Settings.

NOTE: Only Peak Flow and Totalizer can be changed - they

can be reset to zero.

NOTE: Totalizer has a maximum value of 99,999,999. If this

number is reached, the Totalizer must be reset to zero

to continue tracking this value.

USB Connection for Field Programming

The XTR2 features a USB port that allows you to connect a PC

to the control for field programming and diagnostic parameter

download.

NOTE: Field Programmer software is required for field

programming features. See XTR2 Field Programmer

Manual for more information on using the Field

Programmer software.

Pressing on the Format screen displays the USB screen.

Figure 33 USB Screen

When the USB screen appears, connect a USB cable to the

USB port on the control circuit board. Connect the other

end of the USB cable to a PC with the Field Programmer

software installed and follow the directions in the XTR2 Field

Programmer manual to complete the connection. Press to

return to Master Settings.

NOTE: Do not remove USB cable from computer or control

while connected and transferring data. See the XTR2

Field Programmer manual for proper disconnection

procedure.

16 •

FLECK

5810 & 5812 XTR2 Service Manual

Содержание FLECK 5810 XTR2





































Результаты поиска

Содержание FLECK 5810 XTR2

Отзывы:

Бренды по названию

Популярные бренды

Pentair FLECK 5810 XTR2, Руководство по обслуживанию

Результаты поиска

Содержание FLECK 5810 XTR2

Отзывы:

Бренды по названию

Популярные бренды