Installer manual Fleck 4600 MECH - Maintenance
66 / 92
Ref. MKT-IM-027 / C - 12.11.2019
9.4.4
Piston and/or brine valve and/or seal and spacer kit disassembly/
replacement
1. Remove the power head, see Power head disassembly/replacement [
2. Using a flat screwdriver or an 8 mm wrench, unscrew (
3
) and remove the top plate (
4
).
3. Remove the brine valve (
6
) and/or the piston (
5
).
Caution - material
Risk of damage on piston due to wrench use !
Usind a wrench on piston rod coating will cause leakages.
4. Using a small hook, remove a seal (
7
).
5. Using the puller (
1
), remove a spacer (
8
).
6. Repeat the two previous steps for all the seals and spacers.
7. Lubricate each new seals (
7
).
8. Put back a seal (
7
) using the stuffer (
2
).
9. Put back a spacer (
8
) using the stuffer (
2
).
10. Repeat the two previous steps for all the seals and spacers.
11. Lubricate the piston o-ring (
5
).
12. Put back the brine valve (
6
) and/or the piston (
5
).
13. Using a flat screwdriver or an 8 mm wrench, fix the top plate (
4
) with the screws (
3
).
14. Rebuild the power head, see Power head disassembly/replacement [
Caution - material
Risk of damage due to wrong lubricant use !
Do not use petroleum-based lubricants such as vaseline, oils, or hydrocarbon-based
lubricants.
Use only approved silicone grease or soapy water !
9.4.4.1
Special tools needed
1
2
Содержание Fleck 4600 MECH
Страница 1: ...FLECK 4600 MECH INSTALLER MANUAL WATER PURIFICATION...
Страница 17: ...Installer manual Fleck 4600 MECH Description Ref MKT IM 027 C 12 11 2019 17 92 3 3 Outline drawing...
Страница 91: ...Installer manual Fleck 4600 MECH Notes Ref MKT IM 027 C 12 11 2019 91 92...
Страница 92: ...www pentairaquaeurope com...
