8
1/ Clean the filter (4.1 to 4.6).
Note: the Robotic cleaner requires a clean filter to deliver optimum
performances as it only moves using jets from the impeller. The more
clogged the filter, the weaker the jets and the slower the robotic clea-
ner.
2/ Check that filter and canister are well positioned (4.9). If the robo-
tic cleaner has operated with wrongly positioned filter or canister,
clean the inside of the robotic cleaner with a hose to remove dirt from
the impeller and turret (4.6).
The controller is ON but
cleaner does not move or
very slowly.
The robotic cleaner does
not turn or not enough to
change direction.
If the suggested solutions do not solve the problem, please contact our technical support team :
- by email
or by phone
+33 9 51 53 95 64
.
Troubleshooting
SYMPTOMS
CORRECTIVE ACTIONS
Optimum rotation with empty filter and on a flat floor is within 60° and 120°.
Degree of rotation may vary depending to the grip of the wheels on the pool floor.
The cleaner has turned to default mode. It still work properly but it is
no longer driven by the obstacle detector but by a predefined path for
pool of 10x5m, therefore if your pool is smaller, the robotic cleaner
may stop for a few more seconds when he hits a wall before changing
direction.
Please contact Pentair Technical support by email to report the issue
or by phone
+33 9 51 53 95 64.
The orange LED is ON
continuously
Check that dirt does not block rotation of the turret by passing your
finger through the front vent to rotate the turret a few degrees. If you
can feel resistance, clean the turret (4.6) until you can feel the turret
turning free rotation.
Install the 4 wheels provided in the accessories bag on the filter box.
(2.1 - 2.2).
Cleaner got stuck on
main drain or in slope
transition
Содержание BLUESTORM
Страница 11: ...9...
