Rev. C 7-29-05
3
P/N 840259
PG2000 Specifications
Electrical
Input Voltage .............................. 120 V @ 2 A
Power Consumption ................... Approximately 200 Watts
Mechanical
Dimensions ................................. 15 in. x 10½ in. x 12 in.
Weight ....................................... 20 lbs.
Materials .................................... High strength plastic
This unit will accommodate up to 600 FIBERworks
®
fibers.
Contents of the Shipping Carton
This package should contain all of the following items:
√
PG2000
®
√
Sub-terrain Mounting Base
√
Ferrule Kit
√
PG2000 Installation Manual - (this manual)
√
Owner's Manual
√
Warranty Registration Card
To perform this installation, you will need the following items:
Electrical wire and conduit to connect main power, FIBERworks
®
cable and fittings as required,
Professional Termination Kit, (p/n 21005500), and the tools/equipment listed in relevant sections of this
manual.
Table of Contents
SECTION I.
Before You Begin Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
The Installer’s Ten Laws of FIBERworks
®
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
The Pool Designer/Salesperson’s Ten Laws of FIBERworks
®
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
A.
FIBERCAD Design Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
B.
Wide Angle Lens positioning with the PG2000 centered at end of the pool . . . . . . . . . . . . . . . . . 6
C.
Wide Angle OptiFusion Lens positioning on the side of the pool with the PG2000
centered on side of pool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SECTION II.
Running Conduit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SECTION III.
Installing Lens Housings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SECTION IV.
Preparing to Mount the PG2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SECTION V.
Feeding or Pulling the AmerGlow Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SECTION VI.
AmerGlow Lens Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
SECTION VII. Installing the Ferrule Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
SECTION VIII. Installing the PG2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
SECTION IX.
Synchronization of SAm
®
/SAL
®
and Fiberworks
®
(Wiring Diagrams) . . . . . . . . . . . . . . . . .25
SECTION X.
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
