Pentair Pool Products IntelliChlor CIC60P, Инструкция по установке и эксплуатации

Страница: 7 / 40

1
IntelliChlor Electronic Chlorine Generator Installation and User’s Guide
IntelliChlor
®
Electronic Chlorine Generator Overview
The IntelliChlor
®
Electronic Chlorine Generator (IECG) salt chlorinator uses a process known as electrolysis to
produce chlorine gas which immediately dissolves into a solution to create Hypochlorite and Hypochlorous acid
pool and spa water sanitizer from a low concentration of salt added to the pool water. Hypochlorite and
Hypochlorous kill bacteria, oxidizes organic material, and kills algae, then reverts back to salt. The IECG then
reuses the salt and the process starts over again. The IntelliChlor system is comprised of the IECG and Power
Center.
CAUTION - The IntelliChlor Electronic Chlorine Generator (IECG) is designed only to produce chlorine. The
IECG does not monitor or control chlorine levels in the pool or spa water. It is the pool owner’s responsibility for
monitoring and maintaining free chlorine levels at the APSP recommended range of 2.0 to 4.0 parts per million
(ppm). It is the pool owner’s responsibility to check, on a regular basis, the free chlorine level while the pool
pump is running, and adjust the IntelliChlor Electronic Chlorine Generator accordingly.
WARNING - Salt is an inherently corrosive material. While the levels of salt required for proper
operation of the IntelliChlor Electronic Chlorine Generator are relatively low when compared to sea water and
other salt solutions, placing any amount of salt in your pool increases the likelihood of corrosion or other
deterioration of pool equipment and any surfaces used in and around your pool. Metal parts (including steel
pools) and certain natural and man-made surfaces are particularly susceptible to corrosion and deterioration
when used in and around salt water pools. Pentair Water Pool and Spa (“Pentair”) does not represent or
otherwise guarantee that the proper use of the IntelliChlor Electronic Chlorine Generator will prevent corrosion or
other deterioration of pool equipment and any surfaces used in and around your pool. Consult your experienced
pool professional, who should be able to advise you on the proper material selection, installation techniques for
those materials, and the proper use, care and maintenance of those materials for your specific pool type and
location in order to minimize the corrosion and deterioration that is inherent in and around salt water pools.
CAUTION - FOR ALL NEWLY CONSTRUCTED OR RESURFACED PLASTER POOLS: Do not
operate the IECG with newly poured or resurfaced pool plaster. Salt is a corrosive element and severe
salt damage can occur to your pool. Wait at least ONE (1) MONTH after construction to allow plaster to
cure before adding salt and operating IECG. Follow the pool surface manufacturer’s guidelines for your
specific pool.
FOR NEW VINYL LINER POOLS, contact the manufacturer for recommended guidelines before adding
salt and operating the IECG.
Replacement CIC60P and CIC60S Cell Part Numbers
• CIC60P - P/N 521151
• CIC60S - P/N 521005
Features
• Superior design combines cell and control panel as one assembly.
• Connects to ORP system via dry contact wires, to switch on or off based on chlorine demand.
• Cell blades are made from a titanium metal base and coated with precious metal Ruthenium oxide.
• Cell blades are capable of producing chlorine for at least 10,000 hours, when the IECG is used properly.
• The IECG can be installed horizontally or vertically.
• Separate Power Center mounts to wall at equipment pad, for easy AC wiring.
• Electronics run cool for long, reliable life.
• Cell hour meter reports current usage to determine how many hours remain in the life of the unit.
• CIC60P and CIC60S cell produces up to 2.00 lbs of chlorine per 24 hours.
• Head Loss of the IECG system installed into the main line is less than 1 psi.
• Salt level LED indicators show three ranges for the amount of salt in pool.
• Red and green LED indicators show system status for water flow, cell status and cold water.
• MORE and LESS output buttons control how much chlorine is produced.
• BOOST cycle sets the unit to maximum chlorine output for 24 hours of pump run time.
• UL listed to UL1081 standards for swimming pool chlorinators.
• Approved NSF regulatory standards, and CE certified.