IntelliBrite
®
5g White Pool Light and White Spa Light Installation and User’s Guide
10. Install the IntelliBrite light assembly into the niche and tighten the special
bronze pilot screw.
Use only the
special pilot screw provided
with this
underwater light. This screw mounts and electrically grounds the housing
securely to the mounting ring and wet niche. Failure to use the screw
provided could create an electrical hazard which could result in death or
serious injury to pool users, installers or others due to electrical shock.
11.
Final check for proper IntelliBrite light operation:
Switch on the
main switch or circuit breaker to the system, and the switch that
operates the IntelliBrite underwater light itself. The light should
illuminate when power is applied. If not recheck the installation steps
starting with Step 1 (page 4).
9.
Connect all three conductors to the corresponding circuit wires in the
Junction Box (black wire to power, white wire to common, and green
wire to ground) and secure the Junction Box cover in place.
5
IntelliBrite 5g White Pool Light
Pilot screw (bronze)
IntelliBrite Spa Light
Pilot screw (bronze)
